小玩子 2006-7-18 01:54
[转帖]T60/T60p X60/60s安装Windows XP操作系统指南
<b>
</b>T60/T60p X60/60s安装Windows XP操作系统指南
新一代的IBM Thinkpad 6系列中采用的SATA硬盘,并在bios里面将sata的模式默认设置为AHCI,导致用户自行安装操作系统的时候出现硬件无响应,蓝屏,安装失败,但我们并不是没有办法给自己的本本重新安装操作系统,以下文字摘自IBM官方网站的文档,本人加以翻译,不对产生的任何问题负责,相关驱动我已上传,请看附件
------------------------------------
从说明文档里我们能看到两种安装方式:
第一种是clean install:
1. Attach a diskette drive to your computer.
1,将一张软盘插入系统软驱(可以用双起U盘实现)
2. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\SATA and copy the driver to a diskette.
下载Intel Matrix Storage Manager Driver(我上面的帖子已提供)并把其解压到 C:\DRIVERS\WIN\SATA (其实任意地方都行),然后把它拷贝到软盘里。
3. To make sure that SATA AHCI is enabled, start the BIOS Setup Utility menu.
4. Select "Config".
5. Select "Serial ATA (SATA)".
6. Select "AHCI".
3、4、5、6是告诉大家如何把SATA设置成AHCI模式,这个机器默认就是这样的,基本可以跳过
7. Change the startup sequence of your computer. Following the instructions on the Startup menu in the BIOS Setup Utility, set the CD-ROM drive to start first.
改变启动顺序,光驱第一(这么做的目的是为了从光盘装系统,如果是从硬盘装就不用了)
8. Insert the CD for Windows XP into the CD or DVD drive, and restart the computer.
插入Xp安装盘并重启
9. To install a third-party SCSI or RAID driver first, press F6.
“安装第三方SCSI或RAID驱动,请按F6
10. When prompted, select S for Specify Additional Device.
当安装界面出现,选S表示Specify Additional Device
11. When prompted, insert the diskette that you created in step 2, and press Enter.
然后插入你刚才拷贝了驱动程序的软盘
12. Select "Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M)", and press Enter.
选择Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M,按enter
13. To continue the installation, press Enter again. Leave the diskette in the drive until the next reboot; the software may need to be copied from the diskette again when the files are copied during setup.
再按一次enter进行继续安装,不要拿出软盘
14. Follow the instruction to complete the OS installation.
继续正常安装操作系统
第二种方法是针对没有软盘驱动器的用户,官方文档说明如下:
If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure:
如果你没有软驱,你可以按照下面的方法安装 Intel Matrix Storage Manager Driver
Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility before installing Intel Matrix Storage Manager Driver, your computer will not respond; it will only display a blue screen.
注意:如果你把SATA选成了AHCI模式,那么当你安装 Intel Matrix Storage Manager Driver 之前系统会没有反应,蓝屏
1. Start the BIOS Setup Utility menu.
2. Select "Config".
3. Select "Serial ATA (SATA)".
4. Select "Compatibility".
1~4,就是开机,按F1进bios,然后把SATA选成compatibility模式。
5. Install Windows XP and Service Pack 2.
正常安装windows xp
6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\SATA.
下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA
7. Run Intel Matrix Storage Manager Driver. To do this, go to C:\DRIVERS\WIN\SATA\PREPARE, and double-click install.cmd.
运行C:\DRIVERS\WIN\SATA\PREPARE中的install.cmd,安装Intel Matrix Storage Manager Driver
8. Turn the computer off and then on again.
重启
9. Start the BIOS Setup Utility menu.
10. Select "Config".
11. Select "Serial ATA (SATA)".
12. Select "AHCI".
9~12,进入bios把sata模式改回AHCI
13. Start Windows XP. The Welcome to the Found New Hardware Wizard appears.
14. Click "No, not this time", and then click "Next".
15. Select Install from a list or specific location (Advanced), and then click Next.
16. Select "Search for the best driver in these locations". Then select "Include this location in the search:", specify the path, C:\DRIVERS\WIN\SATA, and click "Next". The Completing the Found New Hardware Wizard appears.
17. Click "Finish".
18. When the System Settings Change window appears, click "Yes". The computer restarts.
13~18,进入操作系统,发现新硬件,指向C:\DRIVERS\WIN\SATA完成驱动程序的安装
Bluestone 2006-9-6 23:48
<P>太长了等本本买回来再研究</P><P>现在用的电脑是sata的 装个drv smater 还不行吗?</P>
Bluestone 2006-9-6 23:55
<P>6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\SATA.
下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA</P><P>没有软驱怎么 “下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA”</P><P>还有台式机如果不装驱动,就是安装系统慢一些</P><P>本本是不是没驱动压根不能装系统吗?</P>[em06][em06]
king_123 2006-9-7 05:24
怎么那么麻烦啊?难道不是设置光驱启动,然后放XP安装盘就可以自动安装了的么?
小玩子 2006-9-8 19:45
<DIV class=quote><B>以下是引用<I>Bluestone</I>在2006-9-6 15:55:44的发言:</B>
<P>6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\SATA.
下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA</P>
<P>没有软驱怎么 “下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA”</P>
<P>还有台式机如果不装驱动,就是安装系统慢一些</P>
<P>本本是不是没驱动压根不能装系统吗?</P>[em06][em06]</DIV>
<P>
<P>不下载SATA 硬盘驱动也可以,只是得在BIOS 里改一下设置便可。</P>
找小小 2006-10-3 19:51
这个有什么用么[em09]在动态买到的东西不都是安装好的么!!??
wangsy8008 2006-10-14 03:26
<P>不错的文章, 正好解决了我的系统安装问题. 学了一招, 谢谢!</P>
小玩子 2006-10-26 22:49
<DIV class=quote><B>以下是引用<I>wangsy8008</I>在2006-10-13 19:26:29的发言:</B>
<P>不错的文章, 正好解决了我的系统安装问题. 学了一招, 谢谢!</P></DIV>
<P>呵呵,学无止竟哦。</P>
zkfablife 2006-11-29 06:37
等买了机子自然就明白了,呵呵
Steven2006 2006-12-5 01:55
学习了,非常感谢
tyme 2007-1-1 08:05
<P>先学习了,以后肯定能用上</P>[em01]
possible 2007-1-16 18:39
<P>辛苦辛苦</P><P>这个要买了机器再研究一下才好</P>
shenrf 2008-3-9 16:58
好东西........................................
wamong 2008-5-30 21:17
上次给领导装x60,已重分区,分掉了隐藏分驱分没了,又没有光驱,手里的xp盘还安装不了,后来把硬盘取下来,挂在移动盒子上,复制了一个带sata驱动的系统才搞定:lol
后来才知道是sata的事,好晕啊
jasonclever 2008-6-11 00:35
支持,但是文字有点乱,还有英文,有些英文又没有翻译,不过,加油